The electrical aptitude test, explained in plain English
Short answer: the electrical aptitude test used by IBEW and NECA apprenticeship programs is a 69-question, multiple-choice test in two timed parts: Algebra and Functions (33 questions, 46 minutes) and Reading Comprehension (36 questions, 51 minutes). No calculator is allowed and there is no penalty for guessing. You learn only whether you got a qualifying score, and if you did not, you wait at least 90 days to retest.
This guide covers what each section asks, how scores turn into an interview and a ranking, and how to prepare in four weeks. Every fact links to a training program or the test sponsor. Then you can try 10 questions right here, or take the full 69-question practice test.
Want to start now? The free full-length practice test has all 69 questions, a 97-minute timer and a worked answer for every question.
Take the free practice testWhat is the electrical aptitude test?
It is the entrance test that most union electrical apprenticeships use to decide who gets an interview. People call it the IBEW aptitude test, the NJATC aptitude test or the Electrical Training Alliance aptitude test. They all mean the same two-part battery, sponsored by the Electrical Training Alliance (the IBEW and NECA training organization, formerly the NJATC) and given by your local Joint Apprenticeship and Training Committee (JATC).
The test checks two things the trade needs from day one: whether you can work with formulas and unknowns, and whether you can read a technical page and pull out exactly what it says. It does not test electrical knowledge. You can score well without ever having wired a circuit.
What is the format of the test?
The Electrical Training Alliance describes the battery on its application process page. The numbers below come from that page and from the NECA-IBEW Electrical Training Center in Portland.
| Part | Questions | Time | Time per question |
|---|---|---|---|
| Algebra and Functions | 33 | 46 minutes | about 84 seconds |
| Reading Comprehension | 36 | 51 minutes | about 85 seconds |
| Total | 69 | 97 minutes | plus a short break |
- Calculator: not allowed. The Portland center states it plainly, and you should practice the same way.
- Guessing: no penalty. In the Alliance's words, your score depends only on the number of correct answers.
- Unfinished sections: if you run out of time, you are scored on what you answered, so a blank is simply a lost point.
- Time at the center: the battery takes about two and a half hours with instructions, and the Alliance tells applicants to plan for roughly three hours.
- Results: the Portland center says an independent facility scores the tests and results arrive two to four weeks later.
What kind of math is on the electrical aptitude test?
The math part is algebra, not arithmetic drills. Expect to solve equations, work with functions written as f(x), find the next number in a series, simplify and factor polynomials, and rearrange formulas. A typical question gives you f(x) = 2x² − 3x + 1 and asks for f(−2). The Alliance asks applicants to show one full year of high school algebra with a passing grade, which tells you the level: first-year algebra, done fast and without a calculator.
The topics that come up most, with a worked method for each, are on the algebra and functions page:
- Linear equations and inequalities (including flipping the sign when you divide by a negative)
- Function notation, composite functions and evaluating with negative numbers
- Number series: adding, multiplying, squares, and patterns where the gaps grow
- Polynomials: expanding, factoring, difference of squares, simple quadratics
- Exponents, roots and formula rearrangement (V = IR, P = I²R)
- Slope, lines and two-equation systems
What is the reading comprehension section like?
You get a series of passages, each followed by several questions. The Alliance's own sample notes that its practice passage is "shorter than those on the actual test." Questions ask for the main idea, a stated detail, what a word means in context, what you can infer, and which statement is not supported. Topics are often technical or work-related, but every answer is in the text. The trap is choosing an answer that is true in real life but never stated. Methods and a worked passage are on the reading comprehension page.
Try 10 questions now
Eight algebra questions and two reading questions, written in the style of the real test. Pick an answer to see if you are right and how to work it out. We wrote every question for this site and checked each answer by working it out in full.
Show answer and working
Show answer and working
Show answer and working
Show answer and working
Show answer and working
Show answer and working
Show answer and working
Show answer and working
Read the passage, then answer questions 9 and 10. Real passages are longer.
Before working on a motor circuit, an apprentice must prove that it is dead. Switching off the breaker is only the first step. The breaker is then locked in the off position and tagged with the worker's name, so nobody can switch it back on while the work goes on. Next, the apprentice checks the meter on a known live source, tests the circuit conductors, and then checks the meter on the known live source again. The second meter check matters because a meter that fails partway through would read zero volts on a circuit that is still live. Skipping it saves a few seconds, but it removes the only proof that the meter was working when it read zero.Why does the apprentice check the meter on a known live source a second time?
Show answer and working
Show answer and working
How we built and checked these questions
We wrote the 33 algebra questions in our full practice test from scratch, one for each topic group listed above, and a script recomputes every answer key whenever the test is regenerated, so a wrong key cannot be published. Systems of equations and composite functions take the most steps in that set (four to five lines of working each), which is why the four-week plan below saves them for weeks two and three, after the basics. The 10 quiz questions above were each solved twice, once by method and once by plugging the answer back in (for question 1, 3(12) − 7 = 29 = 2(12) + 5).
What score do you need on the electrical aptitude test?
There is no single national pass mark that applicants are told. The Electrical Training Alliance says you receive only notice of whether you earned a qualifying score, not your exact score. Local programs commonly describe results on a 1 to 9 scale, and many invite applicants who score 4 or higher to an interview. Some ask for more. Some programs have dropped minimums altogether: JATC Local 26 says its minimum score requirements "have been eliminated" under its new GAN process. Because the cut-off is set locally, the safe target is to aim well above it: more correct answers can also lift your place on the ranked list where the score counts toward ranking.
How scores, interview points and ranking lists work, with examples from real programs, is covered on the scoring, retakes and ranking page.
What happens if you fail the electrical aptitude test?
You can test again, but not right away. The Alliance's rule is direct: "A full three (3) months (90 days) must elapse before you may retake the test." It adds that a six month rule applies after each later retest, and that testing early makes the new score invalid and starts another 90-day wait. Use the gap: most people who fall short lose points on the algebra section, and three months is enough time to fix that with steady practice.
Do all programs use this test?
No, and this is changing. In 2026 some JATCs moved to an aptitude test from GAN Human Resources. The Nashville Electrical JATC describes a five-part GAN battery (numerical computation, numerical reasoning, paper folding, reading comprehension and mechanical reasoning), taken on a computer, with no calculator, and used to rank applicants rather than as pass/fail. Non-union programs run by IEC and ABC chapters use their own tests, often from Ramsay Corporation. See the GAN aptitude test page and the IEC and ABC test page, and always ask your program which test it uses.
How to prepare in four weeks
This plan assumes about 45 minutes a day. If your algebra is rusty, give week one twice as long.
| Week | Focus | Done when |
|---|---|---|
| 1 | Take the full practice test once in exam mode to find your weak spots. Then rebuild the basics: equations, negatives, order of operations. | You solve one-step and two-step equations with negatives without errors. |
| 2 | Functions, series, exponents and formula rearrangement. Do 15 questions a day by hand. | You can evaluate f(−3) and rearrange P = I²R in under a minute. |
| 3 | Factoring, quadratics, slope and systems. Add two reading passages a day, timing each one. | You finish a passage and its questions in about 7 minutes. |
| 4 | Full timed practice, then review every wrong answer. Rest the day before the test. | You finish both sections with time to spare. |
On test day, bring a photo ID, arrive early, and never leave a question blank, since a guess costs you nothing.
Ready for the full test? 69 questions, timed like the real thing, scored instantly by section.
Start the practice testFrequently asked questions
What is on the electrical aptitude test?
The test used by IBEW/NECA apprenticeship programs has two parts: Algebra and Functions (33 questions, 46 minutes) and Reading Comprehension (36 questions, 51 minutes). All questions are multiple choice. Some programs now use a different test from GAN, which adds arithmetic, paper folding and mechanical reasoning.
Can I use a calculator on the electrical aptitude test?
No. Training centers that publish the rules say calculators are not allowed, and the GAN test used by some programs also bans them. Practice every question by hand.
What score do I need to pass?
The Electrical Training Alliance does not publish one national number, and it tells applicants only whether they earned a qualifying score. Many local programs describe a 1 to 9 scale with 4 as the usual bar for an interview, but your local sets its own rule.
How soon can I retake the test?
The Electrical Training Alliance says a full three months (90 days) must pass before a retest, and that a six month rule applies after each later retest. Testing early makes the score invalid.
Is the electrical aptitude test online?
No. You take it in person at a test site arranged by your local program. The Electrical Training Alliance tells applicants to plan for about three hours at the test center.
Is there a penalty for guessing?
No. Your score is the number of questions you answer correctly, so answer every question, even when you have to guess.
More answers on the full FAQ page.
Sources
- Electrical Training Alliance, The Application Process (test parts, timing, scoring notice, retest rule, algebra requirement)
- Electrical Training Alliance, sample test questions
- NECA-IBEW Electrical Training Center (Portland), Preparing for the aptitude test and the interview (calculator rule, result timing)
- JATC Local 26, GAN application changes (2026)
- Area III Inside Electrician JATC, selection procedure (2016, archived) (ranked pool, interview panel)
- Nashville Electrical JATC, applicant information packet, August 2026 (GAN test)